Skip to content
Good food. Growing things. Everyday home life.Meet Nancy On The Home Front

Home & decor · Home project guide

How to measure for curtains: width, drop and the heading

Measure the fitted pole or track first, then choose where the curtains will finish. Keep width and drop on separate lines and write down the heading style. Those three details make it much easier to compare curtains without ordering a pair that covers the glass but barely closes.

Read this guide online: https://nancyonthehomefront.com/how-to-measure-for-curtains/

How to measure for curtains: width, drop and the heading: a simple measuring method.

Measure the pole or track

Use a metal tape and measure the working width of the fitted pole between its decorative ends. For a straight track, measure the track itself. John Lewis’s measuring guide starts with the fitted hardware because that is the span the curtains need to cover.

Write the number with its unit, such as “pole: 180cm”. Measure it again before shopping. If the hardware is still to be fitted, settle its position first; moving the pole later also changes the curtain drop.

Start the drop at the right point

The starting point depends on the heading. Pencil pleats on a pole usually hang from the small eye beneath each ring; on a track, the track and hook arrangement matter. Eyelets sit directly on the pole. Follow the curtain seller’s diagram for the style you are ordering.

Blinds2Go’s curtain guide shows separate drop measurements for poles and tracks and explains the fabric it adds above its eyelets. Use that supplier’s allowance only for its ordering method. Adding it again can leave your curtains too long.

Choose a finish you can live with

Hold the tape down to the intended hem. Check the sill, radiator, furniture and floor along the whole opening. A clear floor gap makes the hem easier to keep off a dusty floor; a curtain that deliberately trails needs a different measurement.

Take the drop at the left, middle and right and note any difference. On an uneven floor, decide which clearance you need before picking the finished length. Keep a photograph of the tape’s starting point with the numbers if the heading is easy to confuse.

Check whether the width is for one curtain

Read the product’s size description. A width can describe one flat panel rather than the combined width of the pair. Two 180cm panels supply 360cm of flat curtain width. Across a 180cm pole, that gives a fullness ratio of two.

The curtain size calculator separates pole width, number of panels and fullness. Enter your finished drop as a note for shopping. It does not add sewing hems or change the seller’s measurement rules.

Make a short order note

Keep one line for each window: room, pole or track width, heading, finished drop and number of panels. Add the product’s stated panel width before ordering. Give similar windows their own names so the bedroom measurement does not end up against the sitting-room curtains.

For an overlap track, bay or made-to-measure system, use its specific measuring instructions. Send the seller the measurements it asks for. You can keep your own calculation beside them, but do not add a fullness multiplier to a width the maker already uses to work out the fabric.

More from Nancy

Keep your measurements with the project. For the next step, use our guide to fullness and panel widths, curtain care.

A LITTLE MORE FROM NANCY

Nancy

Find something good to cook, get a small garden started or pick up a useful idea for your home.

Meet Nancy