Check whether the plant needs a bigger pot
Look at the roots before buying a replacement. Support the plant, ease the root ball out of its pot and check the sides and base. A few visible roots are normal. A tightly packed layer of roots circling the container is a better reason to move up a size.
A large plant does not automatically need a large new pot. If its roots still have room and its current mix drains well, you can leave it where it is. Keep the nursery pot measurements on your phone when shopping for a cover; that saves trying to guess the size from a photograph.
The RHS repotting guide explains how root congestion and container size affect the decision. Our houseplant repotting guide covers the move itself.
Go up a modest amount
For small containers under 25cm in diameter and depth, the RHS suggests a replacement about 2.5 to 5cm wider and deeper. Treat that as a starting point for plants that genuinely need more space, then check your particular plant's requirements. A shallow-rooted plant and a deep-rooted plant will not necessarily suit the same shape.
For example, a healthy root ball filling a 12cm pot might fit a 15cm pot well. A 28cm pot creates a much larger ring of fresh mix around those small roots. That extra mix can stay wet longer, so resist choosing a huge container simply to avoid repotting again.
Compare the inside measurements, especially when a pot has thick walls or a narrow base. Make sure the root ball fits without forcing it down, and allow room below the rim for watering. Keep the plant at its original planting depth.
Find the drainage hole before you buy
Turn the pot over and check for open drainage holes. A dimple or marked drilling point is not an open hole. If you want to use an undrained ceramic cover, put a draining nursery pot inside it and take that inner pot out when watering.
Do not add a gravel layer to compensate for a missing hole. The University of Maryland's potting advice recommends keeping gravel out of the bottom. Choose a suitable potting mix and an actual route for water to escape.
After watering, let the inner pot drain, empty any collected water and return it to its cover. Check the cover again if water keeps dripping into it. Iowa State's houseplant troubleshooting guide identifies standing water in saucers and covers as an overwatering problem.
Choose a material you can manage
Unglazed terracotta loses moisture through its porous sides, so the mix often dries more quickly than in plastic. That can be useful, but it also means you need to check for water rather than following the routine you used with the old pot. Glazed ceramic and plastic retain moisture for longer; either can work when the container drains and the watering suits the plant.
Think about weight as well. A big ceramic pot can be awkward to carry to the sink. A lighter nursery pot inside a heavier cover gives you the appearance you want without lifting the whole arrangement each time. Check that you can grip and remove the inner pot easily.
Give an outer cover enough working room
Take the inner pot with you if possible. It should lift in and out freely, with room to get your fingers around the rim. Check the fit at the base as well as the top: some decorative pots taper sharply, so a pot that fits the opening may sit crookedly halfway down.
Put the empty cover on its intended surface and check that it stands steadily. Use a suitable protective mat or tray on furniture, and look underneath after the first watering. A tidy display is much easier to keep when you can remove the plant, drain it and see whether the cover is dry.
Keep growing
For the next step, read how to repot houseplants, how to water houseplants.
A LITTLE MORE FROM NANCY
Nancy
Find something good to cook, get a small garden started or pick up a useful idea for your home.
Meet Nancy


